Combined AC and DC power analyzer
Revolutionary: Measure strobe lights while they are flashing
GET ADVANCED POWER DATA
Viso LabAnalyzer is an advanced AC and DC power analyzer that complies with light measurements standards (IES LM-79 and CIE S 025). LabAnalyzer fully integrates with your Viso light measurement system and software, and facilitates remote sensing (measuring voltage directly at the light source terminals).
Revolutionary: Measure flashing light sources
One of the two LabAnalyzer models makes it possible for the first time to perform a full 3D light distribution on a strobe lamp – while it is flashing.
This is achieved by synchronizing a Viso sensor with the current pulses measured by the LabAnalyzer. This allows you to accurately measure flashing light sources.
The system even measures the details of the flash waveform, peak voltage, amperes and intensity, period length, number of flashes per period, flash lengths and interval lengths, etc.
This is done by synchronizing the integration time of the sensor with the current readings, which is a new, revolutionary system. Never before has it been so easy to measure strobe lights.
Watch the video on measuring flashing light sources.
NORMAL LIGHT SOURCES
If your light sources do not flash, LabAnalyzer also comes in a model without the synchronization option at a lower cost.
Connect to any Viso light measurement system
Advantages
Dedicated Viso AC/DC power analyzer
Two models – with and without sensor synchronisation (for strobe lights)
Revolutionary sensor sync version: measure pulsed light sources as easily as other light sources
Complies with CIE S 025/ IES LM-79 requirements
Versatile measurement range (up to 100 kHz, 2-270V AC/DC, up to around 2000 W)
Real-time readout on built-in display
Remote sensing feature for optimal accuracy
Full integration with any Viso System
(In sensor sync version: all BaseSpion and LabSpion systems + LightSpion 2024 versions and later)
Downloads
Get more information
LabAnalyzer Specifications
Data out
Voltage
Current
Active power and apparent power
THD harmonics
Displacement factor (AC)
Power factor (AC)
Sync version: Flash period details
Ranges
AC/DC voltage range 2 – 450 V
AC Voltage peak 826 V
AC current peak range 3 mA – 16.5 A
Max. AC power: 1700W @240V /
850W @120 V
Max. DC power: 1700W @240V /
850W @120 V / 170W @24V/ 85W @12V
Physical data
Peli case 11 cm (H) x 27 cm (W) x 18 cm (H)
Weight: Device 2 kg + cables
Mains cable
USB Cable
Remote Sensing cable
Power in
Maximum Input voltage
AC: 270 VAC 50/60 Hz
DC: 380 V
Maximum input Current
14A peak and 7A RMS
Accuracy
Voltage 0.2% of reading + 0.2% of range
Current 0.3% of reading + 0.3% of range
Other Viso Accesories
Easy positioning of your LabSpion sensor. Replace your tripod with a rail-mount for your sensor including distance detector
The LabFlicker instrument records all contemporary flicker metrics including PstLM and connects to all Viso systemsms
The extender of the LightSpion allows you to measure lamps that are up to 22 cm in diameter by extending the sensor distance
Upgrade your existing sensor to provide a broader measurement range (eg. UV) or higher accuracy
